Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9791913
- Product Categories
- Antistatic trash
- Anti-static office supplies
- Anti-static equipment, inst..
- Anti-static clothing
- Anti-static fluid
- Friendly Links
- home > Supply > Supply LY-800 surface resistance tester | Digital megger | heavy hammer surface resistance tester.
Information Name: | Supply LY-800 surface resistance tester | Digital megger | heavy hammer surface resistance tester. |
Published: | 2014-12-26 |
Validity: | 30 |
Specifications: | 1 |
Quantity: | 50.00 |
Price Description: | |
Detailed Product Description: | Model: LY-800 type portable static tester LY-800 can measure impedance, humidity and temperature. 103-1012 ohm impedance measuring surface / m2, 103-1012 ohm resistance measurements Relative humidity: 10% -90% RH · Temperature: 0 ℃ -37.8 ℃ · high accuracy - the whole range · contains electrodes: - 2 five pounds weight, 2.5 inches RTT, RTG disk-shaped electrode -2 3 inches parallel to the surface of the electrode impedance test * LCD digital display and rechargeable battery · measurable mat, floor coating layer, paint, wristbands, overalls, shoes ( shoes), bags and containers LY-800 type megger is based EOS / ESD, CECC, ASTM and UL test procedures designed to measure impedance or resistance of all conductive type, antistatic and electrostatic discharge type surface . Easy to use, high quality, high reliability, the instrument can also measure relative humidity and temperature affect the electrical properties. Features: · measuring impedance, temperature and humidity, in line with ESD standards, S4.1, S7.1 and S11.11 · 103-1012 ohm / □ range, can test the electrical properties of various materials. · 10 V / 100 V measurement scale, suitable for standard work surface and ground. · Plastic instrument to protect me, to prevent damage to the instrument, light-weight, only 150Z (425g), easy to carry · LCD digital display, easy to use, easy reading Automatic power-off function to extend the battery life Automatic zeroing ensure accuracy · parallel electrodes 5 pound probe and built-impedance probe, are in line with ASTM, EOS and CECC standards * One year quality warranty · Chinese manufacturing, confidence, quality and service assurance · NIST track, ISO9000 Assurance and replaceable probe, extension life · 9V DC or nickel-cadmium rechargeable battery or AC adapter, are common in the United States and overseas. LY-800 before ZhaoOuBiao operating manual measurement, first make sure to be tested on a clean surface. First, the surface impedance: (Surface Resistivity) 1, parallel to the probe impedance measurement (Parallel Probe Resistivity Method) parallel probe impedance measurement is consistent with EOS / ESD-S11.11-1993 standard measurement method, which is a fast measurement Methods plane homogeneous material resistance value. This method is also suitable for measuring the multilayer material, but the resistance value report must specify the temperature and humidity measurements. A, the table on the surface of an object to be measured. B, will switch to the desired voltage position (10 volts or 100 volts) C, with about 5 pounds of pressure continues to press the measure button, LCD screen will show the surface impedance measurements, temperature and relative humidity values ??at this time, the entire measurement process is about fifteen seconds species. After? Surface impedance in ohms / □? Temperature unit for photo-style? Relative humidity is a percentage of each measurement unit, press the measure button, LY-800 meter will continuously display the measured values ??trimmed about 40 after the button is released Within five seconds, the display is the last measured value. 2, concentric rings probe impedance measurements (Concentric Ring Probe Resistivity method) (concentric ring probe is optional) to connect two 3.5 mm jack plug into the table and banana plugs and concentric ring probe (optional ) linked. After the probe on the surface of the object to be tested, press the button for about 15 seconds, the LCD shows the correct temperature and relative humidity readings right on the LCD surface impedance is multiplied by 10, ohms / □. For example: Display of 3.5 × 104 ohm / □ on the LCD screen; the actual value of 3.5 × 105 ohm impedance / □. Second, the surface resistivity measurements (point to point) (Surface Resistance Measurement (RTT)) This measurement is consistent with EOS / ESD-S4.1 measurement requirements to measure independent of the ground between the two points of resistance, obtained by this measurement method processing the measurement results and the object, the distance between the two probes 5 pounds and other factors, therefore, should select the correct measurement procedures, each time under the same measurement conditions required for testing. A, the connection plug into the table of two 3.5 mm jack and banana plug with two 5-pound probe linked. B, in accordance with the measurement procedures two probes placed on the surface to be measured. C, select the desired voltage (10 volts or 100 volts) D, press the switch until the selected voltage (10 volts or 100 volts), continue pressing the switch until the measured resistance (ohms), Relative humidity and temperature display on the LCD screen. Third, the surface-to-ground resistance measurement (RTG) (Surface-To-Ground Resistance Measurement (RTG)) This measurement method is used to measure the surface resistance of the surface point and the other between the upper surface of the ground, measuring methods in line with EOS / ESD S4.1 measurement standards. A, the two wires are inserted into one end of the two 3.5 mm jack table, and then pick one of the alligator clips, the other one with a 5-pound disc-shaped probe linked. B, will be known on alligator clips connected to ground, according to the measurement requirements of the disc-shaped probe on the surface of the object to be measured. C, press the measure button until the resistance (ohms), relative humidity, temperature values ??are displayed on the display, the measurement results in line with EIA, EOS / ESD, ANSI, IEC-93, CECC, ASTM measurement standards, for high-impedance material When measured in order to ensure high-precision measurement results measured, so that the two leads need to be careful not to overlap, do not touch the probe leads and the measured object. |
Admin>>>
You are the 27380 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Shijie Static power source operation All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 27380 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Shijie Static power source operation All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility